CW Brabender Plasti-Corder Digi-System PL2200 Lab Extruder/Mixer System
The unit came from a university in working condition. I ran the system at 100 RPM in manual mode and made sure it turned. I couldn't test any of the other functions because I don't know how. The system DOES NOT have a computer but it does have the software.
The Main Unit's Serial Number Tag Reads:
Model Number: DDRV501/PL2200
Serial Number: 0453/SAF
Power Requirements: 230 V, Single Phase, 60 Hz, 16 A
The Direct Current Drive's Serial Number Tag Reads:
Type: GE
HP: 5
RPM: 2500
Rating: 40°C
Power Requirements: 230 V, Single Phase
Field V.: 200
Field A.: 0.92
Frame: CD186ACY
Arm V.: 180
Arm A.: 23.6
Connector: Shunt
Duty: Continuous
Gear Ratio: 25:1
Gear Type: SM
The Extruder's Serial Number Tag Reads:
Type: 2503
Serial Number: 1955
The PL2200's Serial Number Tag Reads:
Type: 680190104
Serial Number: 971262
Power Requirements: 230 V, Single Phase, 1 A, 60 Hz
The FE-2200A Temperature Control Console's Serial Number Tag Reads:
Type: 01-38-000
Serial Number: 1305
Power Requirements: 230 V, 3-Phase, 40 A, 60 Hz
Software Included:
CD with WINMIX V. 1.60.7 and WINEXT V. 1.1.1
Floppy Disk with PL2000/PL2100 Program Loader Version 5.3 (7/1997)
Floppy Disk with PL2000/PL2100 Test Program Version 4.0 (4/1994)
PL2200 Plasti-Corder Digi-System Unit Configuration (this is what the shipping order said, some parts may be pissing however or changed out):
Plasti-Corder Digi-System Model DDRV501, Digital Torque Rheometer - 5 HP, 100 RPM:
With digital output for torque and speed (RPM) control, torque output up to 36, 000 meter-grams, with 'Soft Touch Keypad' and digital display of torque, speed, test time, and melt temperature
Intelligent interface Model PL2200 with control and data acquisition to read up to 4 stock temperature thermocouples, and up to 4 pressure transducers with RS-232C communication
Temperature control console model FE-2200A with 6 PID heating/pulse cooling controlling zones, 4 program controlled air solenoids
Mobile Console Cart, Model 10, Top 24' x 36' for Plasti-Corder, with safety locking foot brake, cabinet entry doors and drawer inside cabinet
WINMIX - Mixing Program - Windows Based (Mixing Complete)
WINEXT - Extrusion Program - Windows Based (Basic Extrusion Program for Multiple Evaluations)
Test Program / Program Loader
Quick Disconnect Cooling Kit for 1 Zone of Mixers or Extruders
Extruder Model 2503, L/D ratio 25:1, Extruder Barrel #416 stainless steel - nitrided, with (1) Temperature/Pressure port and (1) rupture safety port located in end flange of barrel, 3 Zone (1000 watt each zone) heating cooling collars (air cooling). Complete with (4) control thermocouple assemblies, (1) rupture safety plug (catalog #05-00-240) installed in end flange of barrel (rated for 9400 PSIG @ 150°C) and protective shear coupling. Without feed hopper (without die)
Stainless steel bin feed hopper - 1 lb. capacity
The unit came from a university in working condition. I ran the system at 100 RPM in manual mode and made sure it turned. I couldn't test any of the other functions because I don't know how. The system DOES NOT have a computer but it does have the software.
The Main Unit's Serial Number Tag Reads:
Model Number: DDRV501/PL2200
Serial Number: 0453/SAF
Power Requirements: 230 V, Single Phase, 60 Hz, 16 A
The Direct Current Drive's Serial Number Tag Reads:
Type: GE
HP: 5
RPM: 2500
Rating: 40°C
Power Requirements: 230 V, Single Phase
Field V.: 200
Field A.: 0.92
Frame: CD186ACY
Arm V.: 180
Arm A.: 23.6
Connector: Shunt
Duty: Continuous
Gear Ratio: 25:1
Gear Type: SM
The Extruder's Serial Number Tag Reads:
Type: 2503
Serial Number: 1955
The PL2200's Serial Number Tag Reads:
Type: 680190104
Serial Number: 971262
Power Requirements: 230 V, Single Phase, 1 A, 60 Hz
The FE-2200A Temperature Control Console's Serial Number Tag Reads:
Type: 01-38-000
Serial Number: 1305
Power Requirements: 230 V, 3-Phase, 40 A, 60 Hz
Software Included:
CD with WINMIX V. 1.60.7 and WINEXT V. 1.1.1
Floppy Disk with PL2000/PL2100 Program Loader Version 5.3 (7/1997)
Floppy Disk with PL2000/PL2100 Test Program Version 4.0 (4/1994)
PL2200 Plasti-Corder Digi-System Unit Configuration (this is what the shipping order said, some parts may be pissing however or changed out):
Plasti-Corder Digi-System Model DDRV501, Digital Torque Rheometer - 5 HP, 100 RPM:
With digital output for torque and speed (RPM) control, torque output up to 36, 000 meter-grams, with 'Soft Touch Keypad' and digital display of torque, speed, test time, and melt temperature
Intelligent interface Model PL2200 with control and data acquisition to read up to 4 stock temperature thermocouples, and up to 4 pressure transducers with RS-232C communication
Temperature control console model FE-2200A with 6 PID heating/pulse cooling controlling zones, 4 program controlled air solenoids
Mobile Console Cart, Model 10, Top 24' x 36' for Plasti-Corder, with safety locking foot brake, cabinet entry doors and drawer inside cabinet
WINMIX - Mixing Program - Windows Based (Mixing Complete)
WINEXT - Extrusion Program - Windows Based (Basic Extrusion Program for Multiple Evaluations)
Test Program / Program Loader
Quick Disconnect Cooling Kit for 1 Zone of Mixers or Extruders
Extruder Model 2503, L/D ratio 25:1, Extruder Barrel #416 stainless steel - nitrided, with (1) Temperature/Pressure port and (1) rupture safety port located in end flange of barrel, 3 Zone (1000 watt each zone) heating cooling collars (air cooling). Complete with (4) control thermocouple assemblies, (1) rupture safety plug (catalog #05-00-240) installed in end flange of barrel (rated for 9400 PSIG @ 150°C) and protective shear coupling. Without feed hopper (without die)
Stainless steel bin feed hopper - 1 lb. capacity
- Brabender Pl2100 Manual Transmission
- Brabender Pl2100 Manual Pdf
- Brabender Pl2100 Manuals
- Brabender Pl2100 Manuale
- Ela common core pacing guide, brabender pl2100 manual, usmc um 4400 15 appendix v, financial statement analysis gibson 13e solutions manuel, what is the trinity crucial questions 10 rc sproul, unit 3 circles and volume answer key, discrete mathematics through applications 3rd edition answers, samsung galaxy s2 user manual sprint, cool.
- Brabender Pl2100 Manual - argelatobasket.com Brabender Pl2100 Manual If searching for a ebook Brabender pl2100 manual in pdf format, in that case you come on to faithful website. We presented full variation of this book in ePub, doc, PDF, DjVu, txt forms. You can read online Brabender pl2100 manual or downloading. Brabender Pl2100 Manual - actualusa.com.
The influence of manual handling is reduced to a minimum. CW BRABENDER INSTRUMENTS INC - New, Surplus, & Repair - 2 Year Warranty - Over 1,200 Automated Test Fixtures. CW BRABENDER INSTRUMENTS INC Part Search Read and Download Ebook Brabender Pl2100 Manual PDF BRABENDER PL2100 MANUAL.
'longleyguy' <longl...@netscape.net> wrote innews:11727700...@h3g2000cwc.googlegroups.com:
Brabender Pl2100 Manual Transmission
> On Mar 1, 11:40 am, atomweaver <atomwea...@hotmail.com> wrote:
>> 'longleyguy' <longley...@netscape.net> wrote
>> innews:1172765853.869848.88900@30g2000cwc.googlegroups.com:
>>
>> > Greetings, All -
>> > Does someone out there have a copy of the interface software for
>> > use with the PL2100 plasti-corder unit? We recenty took posession
>> > of such a unit and it came lacking the discs. I am not looking for
>> > anything illegal - a legitimate copy would be fine.
>> > Anybody?
>> > Thanks...
>>
>> Is there a reason why the most obvious source for Bradender software
>> won't work?
>>
>> http://www.cwbrabender.com/SoftwareWINEXT.html
>>
>> Regards
>> R. David Zopf
>> Bomar Specialties Co.
>
> If I take it right, the PL2100 is not supported by WINext...
Brabender Pl2100 Manual Pdf
That'd be a good reason ;-)
Brabender Pl2100 Manuals
> I have
> been advised that the interface requires 1995 vintage software. It is
> unclear whether CWB is suprting this or not. I am not in the middle of
> this project - just trying to help colleagues...
>
> Open to suggestions - this was a good one.
>
One thing which might work is a 'Wanted' ad at Labx.com... I've had
some fair success getting photo-copies of less-than-common analytical
equipment user manuals that way.
Brabender Pl2100 Manuale
Another could be to do a publication search of experimental sections for
common polymer journals (JPS A&B, etc), and contact any university
professors who reference collecting data with a PL2100... Tell 'em
you'll barter the software for a summer intern position for one of their
undergrads. Then you can get a kid to teach you the ins and outs of the
software, too ;-)
Last option (likely the priciest) would be third-party extrusion
software vendors like http://www.deltapep.com/ Brabenders are common
enough, and if they are a software vendors, they might be more likely
than even Brabender themselves to have some old code lying around.
Good Luck!
Regards,
R. David Zopf
Bomar Specialties Co.